|
> Re-Naming
a Project
<
You can re-name the currently loaded project. On the
PROJECT NAME screen, you can also enter a comment about the project and
view assorted project information.
1. Press PROJECT.
2. If "NAME" isn’t visible above F3, press PAGE until it is.
3. Press F3 (NAME)—the PROJECT NAME screen appears.
4. Press CURSOR to select the first character in the naming box if it
isn’t already selected.
5. Turn the TIME/VALUE dial to select the desired first character — a
box appears around the currently selected character in the area below
the naming box.
6. Press CURSOR to select the next character.
7. Turn the TIME/VALUE dial to select the second character in the new
name.
8. Repeat Steps 5 and 6 until you’ve entered the entire new name.
9. When you’re done, press F5 (OK).
(Back to File
& Disk Operations) |
RolandVS2480.net
~ Roland VS-2480 Tech Help Website
