|
> Setting
Analog Input Levels
<
1. Make sure that the input jack's PAD button is in the
''up'' position.
2. If you are connecting an electric guitar or bass to the GUITAR HI-Z
jack (above analog input 16), be sure to lock in the GUITAR HI-Z ON
switch.
3. Press HOME DISPLAY.
4. Send some signal into the input jack. The 16 peak indicators - the
small row of numbers 1-16 in the top right part of the LCD screen or
INPUT CLIP 1-16 in the top right of the VGA monitor - represent the 16
analog inputs.
5. Turn up the jack''s SENS knob until its peak indicator lights on the
display.
6. Turn the SENS Knob counter-clockwise slightly until the indicator
doesn't flash.
7. If you've turned the SENS knob all the way down and the input peak
indicator still flashes, Press the jack's PAD button so that it locks in
and then repeat step 5 and 6.
See also: Input Level
Tips
(Back to Inputs/Outputs/Signal
Routing) |
RolandVS2480.net
~ Roland VS-2480 Tech Help Website
