Assigning a Channel Direct Out to an Output - Roland VS-2480 Tech Support Help Site

> Assigning a Channel Direct Out to an Output <

It is possible to send the direct signal from a single channel to one of the outputs. Use the following procedure to route the signal from TRACK 1 to AUX A:

1. Press the CH EDIT button for Track 1.

2. Use the CURSOR buttons to highlight DIR 1.

3. Rotate the TIME/VALUE dial clockwise to choose (darken in) DIR 1.

4. Press EZ ROUTING.

5. Press F3(OUTPUT).

6. Use the CURSOR buttons to highlight AUX A.

7. Rotate the TIME/VALUE dial to connect AUX A to DIR 1/2.

8. Press DISPLAY/HOME to return to the main screen.

(... and if you are using a VGA screen/mouse)

1. Click on the Track number for Track 1.

2. Click on DIR 1.

3. Click EZ ROUTING.

4. Click ROUTING VIEW.

5. Drag the virtual connection from AUX A to DIR 1/2 by clicking and holding the left mouse button.

NOTE: There are 8 direct outs. They can be used from any channel (input or track.)

(Back to Inputs/Outputs/Signal Routing)