|
> Re-Amping
a Signal <
Send the signal out of one of the 2480 back AUX ports (
goto ez routing and assign the AUX A/B output to a internal AUX buss say
aux 7/8 )
Then adjust the aux 7/8 send to the desired level , the signal will
appear at the AUX A/B output ( if you don't want to hear the original
signal turn off the mix button )
Send that signal to your external device or speakers for RE-AMPING
Return the signal into one of the recording inputs and set the channel
to record now just record the new RE-AMPED signal to a new track.
USES: Fixing tracks that lack space or depth, record the speaker output
with a mic in the room this will liven up the track... Sending a signal
to a guitar amp or sim to get a new tone or have a second sound to work
with... etc...
From VSPlanet
Member Mike Buzz
(Back to Inputs/Outputs/Signal
Routing) |
RolandVS2480.net
~ Roland VS-2480 Tech Help Website
