|
> How
do I Display My Input Mixer
on the Meter Bridge?
<
The optional MB-24 meter bridge can display any of the
mixer views of the VS-2480. Use the following procedure to set up the
MB-24 to display the input mixer section while operating in the
VS-2480''s LCD mode:
1. Press UTILITY.
2. Press F1(SYSTEM). If SYSTEM is not displayed over F1, press PAGE
until it is, then press F1(SYSTEM).
3. Press F1(Param1).
4. Cursor to DISPLAY SECTION.
5. Turn the TIME/VALUE dial to select INPUT MIXER 1-24.
Use the following procedure to set up the MB-24 to display the input
mixer section while operating in the VS-2480''s VGA mode:
1. Click on Utility.
2. Click on System Parameter.
3. Click on DISPLAY SECTION.
4. Click and drag the cursor to display ''INPUT MIXER 1-24''.
(Back to Miscellaneous
VS-2480 Operations) |
RolandVS2480.net
~ Roland VS-2480 Tech Help Website
